光纤熔接 ERP

弱电论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

查看: 2980|回复: 3
打印 上一主题 下一主题

等电位连接线的截面问题

[复制链接]
跳转到指定楼层
1#
发表于 2010-2-3 18:34:22 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
华为代理商
《接地》规范:
8.5.1  等电位联结主母线的最小截面应不小于装置最大保护线截面的一半,并不应小于6mm2。当采用铜线时,其截面不宜大于25mm2。当采用其他金属时,则其截面应承载与之相当的载流量。
《防雷》规范:
第6 .3. 4条 穿过各防雷区界面的金属物和系统,以及在一个防雷区内部的金属物和系统均应在界面处做符合下列要求的等电位连接。
铜或镀锌钢等电位连接带的截面不应小于 50mm2。
接地》规范:
8.5.2  连接二个外露导电部分的辅助等电位联结线,其截面不应小于接至该二个外露导电部分的较小保护线的截面。连接外露导电部分与装置外导电部分的辅助等电位联结线,其截面不应小于相应保护线截面的一半。
《防雷》规范:
          各种连接导体的最小截面( mm2 ) 表 6.3.4
等电位连接带之间和等电位连接带与接地装置之间的连接导体,流过大于或等于 25%总雷电流的等电位连接导体时:铜材  16mm2,
内部金属装置与等电位连接带之间的连接导体,流过小于 25%总雷电流的等电位连接导体时:铜材:6mm2
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 分享分享
2#
匿名  发表于 2010-2-10 10:40:02
华为代理商


You now wow power leveling have to go to Outland in order to pick up your wow power leveling next skills from the Jewelcrafting Trainer along with the recipes in order to continue leveling with this Almost Gaming Jewelcrafting guide . aion kinaYou will now only need one gem per attempt as you are cutting gems that often sell well aion kinah on the auction house. Be mindful that Outland cut gems do not sell well aion power level since WotLK has emerged and has better Jewelcrafting gem cuts.For each Jewelcrafting cheap aion power leveling skill area any of the recipes will work so just buy or 重庆二手手机 farm the gems needed for the cuts listed and continue leveling and become the jewelcrafter you want to be.

3#
发表于 2010-11-3 09:57:13 | 只看该作者
华为代理商
规范全称?
4#
发表于 2010-12-5 18:18:31 | 只看该作者
华为代理商
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|广告咨询|VIP注册|关于我们|联系我们|积分规则|手机版|Archiver|弱电之家论坛 ( 京ICP备11008917号-3 )

GMT+8, 2025-6-9 10:11 , Processed in 0.109413 second(s), 21 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表